Autumn Tag

 Hey Quietfire Fans! For today's project I'm sharing with you my Autumn Tag. I combined a variety of Quietfire Design Stamps and Modern Gilding Powders which were all perfect for creating this tag. You'll want to grab a cup of your favourite beverage and learn how to recreate my Autumn Tag at home.

To start, trim a 3 1/8" tag down to 5". Spritz water on the tag.Spritz Carved Pumpkin, Rustic Wilderness and Candied Apple Distress Spray Stain on the tag. Dab off the excess spray with a paper towel.

Apply Jet Black Archival Ink to the Grid Background and stamp onto the tag as desired. You'll need to stamp the grid background a total of seven times. Reapply ink as needed. Distress the edges of the tag. Ink the edges of the tag using Walnut Stain Distress Ink and a blending tool with foam.

Die cut a 2 1/4" Stitched Circle out of a piece of kraft cardstock. Apply Emboss It Ink to the Autumn the years stamp from the Autumn Collection Stamp Set and stamp onto the circle. Sprinkle Copper Scroll Modern Gilding Powders over the stamped sentiment. Tap off the excess powder and emboss with a heat tool. Ink the edges of the circle using Walnut Stain Distress Ink and a blending tool with foam.

From the Leaves Stamp Set, you'll need four of the leaves. Apply Potting Soil Archival Ink to three of the leaves and stamp onto a piece of watercolour cardstock. Apply Potting Soil Archival Ink to the remaining leaf stamp and stamp once onto a piece of watercolour cardstock. Using a waterbrush and a watercolour palette, colour the leaves as desired. Once the leaves have dried, fussy cut eight leaves out. Ink the edges of all the leaves using Walnut Stain Distress Ink and a blending tool with foam.

Foam square the circle 5/8" from the left and 1 1/4"from the bottom of the tag.

Adhere the leaves around the left hand side of the circle as desired.

To finish the tag, tie a piece of twine through the top of the tag.

Here are a few closeups of the finish tag.

Here is the finished Autumn Tag.

Quietfire Design Supplies Used:

- Grid Background

- Autumn Collection

- Leaves

- Copper Scroll Modern Gilding Powders

Other Supplies Used:

- Elizabeth Craft Designs: Planner Essentials 33 - Viewmaster Text Circles and Watercolour Palette

- Ranger Ink: Jet Black & Potting Soil Archival Ink and Emboss It Dabber

- Tim Holtz for Ranger Ink: Distress Ink - Walnut Stain, Distress Spray Stain - Carved Pumpkin, Rustic Wilderness & Candied Apple and Blending Tool with Foam

- Misc: Tag, Twine, Watercolour Cardstock and Kraft Cardstock

Thanks so much for joining me today and I hope that I have inspired you to recreate your own version of my Autumn Tag at home.

- Katelyn

Eat, Drink & Be Merry Wall Hanging

 

Hey Quietfire Fans! For today's project I'm sharing with you my Eat, Drink & Be Merry Wall Hanging, which can easily be turned into a card. I combined a variety of A Way With Words Dies and Modern Gilding Powders which were all perfect for creating this wall hanging. You'll want to grab a cup of your favourite beverage and learn how to recreate my Eat, Drink & Be Merry Wall Hanging at home.

To start, choose two pieces of coordinating patterned papers. Die cut a 4 1/2" Stitched Indented Rectangle out of one of the patterned papers. Die cut a 4 1/4" Fitted Indented Rectangle out of the other patterned paper. Distress the edges of both pieces. Ink the edges of both pieces using Black Soot Distress Ink and a blending tool with foam.

Die cut the Flourished Frame out of a piece of white cardstock. Apply Emboss It Ink to the frame. Sprinkle Kells Gold Modern Gilding Powders over the entire surface of the frame. Tap off the excess powder and emboss with a heat tool.

Die cut the Eat, Drink & Be Merry words out of a piece of white cardstock.

From the Hearts & Love Collection Stamp Set, you'll need the two outlined hearts. Apply Emboss It Ink to the hearts and stamp onto a piece of white cardstock. Reapply the ink to the stamp two more times and stamp onto the same piece of white cardstock. Sprinkle Copper Scroll Modern Gilding Powders over the stamped hearts. Tap off the excess powder and emboss with a heat tool. Fussy cut five of the hearts out.

Foam square the 4 1/4" rectangle to the 4 1/2" rectangle.

Adhere the Flourished Frame to the 4 1/4" rectangle.

Adhere the Eat, Drink & Be Merry words down the 4 1/4" rectangle. I have some of the words sitting on the flourished frame.

Adhere the fussy cut hearts as desired around the words.

To finish the wall hanging, punch two holes at the top of the rectangles. Tie a piece of twine through either hole creating the hanging part.

Here are a few closeups of the finish wall hanging.

Here is the finished Eat, Drink & Be Merry Wall Hanging.

Quietfire Design Supplies Used:

- Flourished Frame

- Eat, Drink & Be Merry

- Copper Scroll Modern Gilding Powders

- Kells Gold Modern Gilding Powders

Other Supplies Used:

- Tim Holtz for Ranger Ink: Distress Ink - Black Soot and Blending Tool with Foam

- Ranger Ink: Emboss It Dabber

- Elizabeth Craft Designs: Stitched Indented Rectangle and Fitted Indented Rectangle

- Graphic 45: Elegance 12x12 Patterns & Solids and Elegance 12x12 Patterned Paper Pack

- Misc: White Cardstock and Twine

Thanks so much for joining me today and I hope that I have inspired you to recreate your own version of my Eat, Drink & Be Merry Wall Hanging at home.

- Katelyn

Rejoice Card

 

Hey Quietfire Fans! For today's project I'm getting into the Christmas Spirit and sharing with you my Rejoice Card. I combined a variety of A Way With Words Dies and Modern Gilding Powders which were all perfect for creating this card. You'll want to grab a cup of your favourite beverage and learn how to recreate my Rejoice Card at home.

To start, choose two pieces of Christmas patterned paper. Die cut a 4" Stitched Indented Rectangle out of one of the patterned papers. Die cut a 3 3/4" Fitted Indented Rectangle out of the other patterned paper. Distress the edges of both pieces. Ink the edges of both pieces using Black Soot Distress Ink and a blending tool with foam.

Die cut a 3 1/2" Stitched Indented Rectangle out of a piece of black cardstock. Distress the edges of the rectangle.

From the Flourished Christmas Tree die, you'll need both tree pieces. Die cut the outline Christmas tree out of a piece of green Christmas patterned paper. Die cut the outline and flourished Christmas tree out of a piece of dark green cardstock paper. 

Apply Emboss It Dabber to a piece of white cardstock. Sprinkle Copper Scroll Modern Gilding Powders over the inked cardstock piece. Tap off the excess powder and emboss with a heat tool. Die cut the Peace on Earth word out of the embossed paper.

Die cut the Rejoice word out of a piece of dark red cardstock.

Apply Emboss It Dabber to a piece of white cardstock. Sprinkle Kells Gold Modern Gilding Powders over the inked cardstock piece. Tap off the excess powder and emboss with a heat tool. Die cut the star and baubles out of the embossed paper.

Adhere the 3 3/4" rectangle to the 4" rectangle. Adhere the 3 1/2" rectangle to the 3 3/4" rectangle.

Foam square the Peace on Earth die cut to the middle of the 3 1/2" rectangle. Adhere the flourished Christmas Tree to the plain Christmas Tree. Use adhesive and foam square to adhere the flourished Christmas Tree to the middle of the Peace on Earth die cut.

Adhere the Rejoice word to the bottom portion of the Christmas Tree.

Adhere the star and baubles to the tree as desired.

To finish the card, cut a cardbase out of white cardstock that measures 5 1/2" x 8 1/2", score at 4 1/4". Adhere the cardfront to the cardbase.

Here are a few closeup photos of the finished card.

Here is the finished Rejoice Card.

Quietfire Design Supplies Used:

- Flourished Christmas Tree

- Peace on Earth

- Rejoice

- Copper Scroll Modern Gilding Powders

- Kells Gold Modern Gilding Powders

Other Supplies Used:

- Tim Holtz for Ranger Ink: Distress Ink - Black Soot and Blending Tool with Foam

- Ranger Ink: Emboss It Dabber

- Elizabeth Craft Designs: Stitched Indented Rectangle and Fitted Indented Rectangle

- Simple Stories: Color Vibe Textured Cardstock Kit - Winter

- Misc: White Cardstock, Christmas Patterned Paper and Black Cardstock

Thanks so much for joining me today and I hope that I have inspired you to recreate your own version of my Rejoice Card at home.

- Katelyn

All Good Wishes for Christmas Tag

Hey Quietfire Fans! For today's project I'm getting into the Christmas Spirit and sharing with you my All Good Wishes for Christmas Tag. I combined a variety of A Way With Words Dies, Quietfire Design stamps and Modern Gilding Powders which were all perfect for creating this tag. You'll want to grab a cup of your favourite beverage and learn how to recreate my All Good Wishes for Christmas Tag at home.

To start, you'll need to die cut a 2 3/8" Stitched Circle out of a piece of white cardstock. Apply Jet Black Archival Ink to the All Good Wishes sentiment from the Christmas Sweet & Sassy Stamp set and stamp onto the stitched circle. Ink the edges of the stitched circle using Black Soot Distress Ink and a blending tool with foam.

Next, you'll need a 3" x 6 1/4" White Tag. Apply VersaMark Ink to the Merry Christmas Stamp and stamp onto the tag. Reapply ink to the stamp and stamp on the remaining portion of the tag. Sprinkle Copper Scroll Modern Gilding Powders over the stamped tag. Tap off the excess powder and emboss with a heat tool. 

Spritz the tag with Gloss Spray Stain in Ruby, Medieval and Gild. Allow the tag to dry. Once the tag is dry, ink the edges of the tag using Black Soot Distress Ink and a blending tool with foam.

Die cut the Peace on Earth out of a piece of white cardstock. Apply VersaMark Ink to the entire surface of the die cut. Sprinkle Kells Gold Modern Gilding Powders over the entire surface of the word. Tap off the excess powder and emboss with a heat tool.

Apply VersaMark Ink to a piece of white cardstock. Sprinkle Forever Platinum Modern Gilding Powders over the entire surface of the cardstock piece. Tap off the excess powder and emboss with a heat tool. Die cut five snowflakes out of the piece of embossed cardstock.

Adhere the All Good Wishes Stitched Circle to the Peace on Earth die cut. Foam square the Peace on Earth die cut to the middle of the tag.

Adhere the five snowflakes as desired on the tag.

To finish the tag, tie a piece of white twine into a bow through the hole at the top of the tag.

Here are a few closeup photos of the finished tag.

Here is the finished All Good Wishes for Christmas Tag.

Quietfire Design Supplies Used:

- Season's Greetings

- Peace on Earth

- Merry Christmas Background

- Christmas Sweet & Sassy

- Forever Platinum Modern Gilding Powders

- Gothic Black Modern Gilding Powders

- Kells Gold Modern Gilding Powders

Other Supplies Used:

- Tim Holtz for Ranger Ink: Distress Ink - Black Soot and Blending Tool with Foam

- Dina Wakley for Ranger Ink: Gloss Spray Stain - Ruby, Medieval & Gilt

- Ranger Ink: Jet Black Archival Ink

- Imagine Crafts: VersaMark Ink

- Elizabeth Craft Designs: Planner Essentials 33 - Viewmaster Text Circles

- Misc: White Cardstock, White Tag and White Twine

Thanks so much for joining me today and I hope that I have inspired you to recreate your own version of my All Good Wishes for Christmas Tag at home.

- Katelyn